Common icons

As you browse through the screens of the various controls (e.g. climate, irrigation and weather), you will come across icons representing specific settings and readouts. The table below explains the meaning of these icons.

What information is available / which icons are displayed varies for each control.

	General settings	Tap this icon to go to the general settings. Here you can view and modify the settings of a particular control.
	Alarm limits	Tap this icon to go to the alarm limits. Here you can specify when an alarm should be triggered. You can set the limits, and check and adjust them.
	Readout screen	This screen displays the readouts available for a particular control, for example, the status of the control or the last time that the control was activated. You can only view the current data on this screen; you cannot modify any of the data.
	Historical information	Here you can view the historical data of a particular control. This 'report' contains relevant data taken over a 24-hour period, for example, the average ambient temperature.
	Access to graphs	A graph shows the trend of the data associated with that control. See also:Graphs.
	Advanced settings	A number of controls include advanced settings. This means that these controls use the readout values from other controls. Example: the outside temperature measured by the weather station.
	Statistical information	This displays the following statistical information: average, maximum and minimum values.
	Configuring stage control --------------------- Settings screen for irrigation control	This enables you to set up stage control. To do this, you first need to determine: The desired temperature and humidity levels How the temperature and humidity levels should be controlled When the above settings should apply For more information, please see Stage control. ----------------------------------------------------------------------------- Here you can set the following for irrigation control: Periods Duration and volume Dosing fertilizers Start conditions For more information, please see Irrigation control.
	Access to sensor calibration	Tap this icon to open the calibration menu. This menu enables you to calibrate the EC and pH sensors. See also: Calibrating the EC and pH sensors.
	Assigning valves to valve groups	Tap this icon to open a pop-up window where you can assign valves to a valve group. See also: Assigning valves to valve groups.
	Valve group status	Here you will find information about a valve group, such as status, current volume and duration.
	Manual valve start	This enables you to select valves manually and instruct them to open immediately. See also: Manual starts.