Alarm screen

On the top bar, there is a bell icon ‘' that enables you to access the alarm screen. When this bell is active, it means that an alarm is currently present.

• Tap the (active) bell ''. The alarm screen opens.

The alarm screen displays information about your current alarms and your alarm history. If you open the alarm screen and no alarms are currently active, then the following text is shown: No alarms present!

Figure 101: The alarm screen

The alarm screen lists the following information for each alarm: status, location, time and corresponding message.

If you tap an alarm, a pop-up appears with detailed information about the alarm. This is also where you can acknowledge the alarm. Acknowledging an alarm resets it. However, if the cause of the alarm has not yet been resolved, then the alarm will probably return almost immediately.

Figure 102: Alarm

At the bottom of the alarm screen, you will find the following buttons:

	Switch alarm off This enables you to disable the bell of an active alarm.
	Alarm condition This button is selected by default. The current situation is displayed.
	Historical alarms This enables you to view historical alarms. If you tap this button, you can use the arrow keys to select the desired date. Historical alarms are saved up to one year.

Alarm values can be set for various controls. These alarm settings can be found under the tiles with the Alarm Limits icon ‘'.

Alarm notification upon restarting

The Meteo-Go! is not immediately fully operational after a restart. As a result, the following alarm messages will appear: 'wind speed offline’ and 'wind direction offline'. You can acknowledge these alarms when the Meteo-Go! starts sending new measurement data. This takes at least five minutes. If there is hardly any wind (< 0,5m/s), then this will take longer. For safety purposes, the HortiMaX-Go! will use the windward side for the roof and side ventilation.